MV-mimicking micelles loaded with PEG-serine-ACP nanoparticles to achieve biomimetic intra/extra fibrillar mineralization of collagen in vitro

Since their discovery, matrix vesicles (MVs) containing minerals have received considerable attention for their role in the mineralization of bone, dentin and calcified cartilage. Additionally, MVs' association with collagen fibrils, which serve as the scaffold for calcification in the organic matrix, has been repeatedly highlighted. The primary purpose of the present study was to establish a MVs–mimicking model (PEG-S-ACP/micelle) in vitro for studying the exact mechanism of MVs-mediated extra/intra fibrillar mineralization of collagen in vivo. In this study, high-concentration serine was used to stabilize the amorphous calcium phosphate (S-ACP), which was subsequently mixed with polyethylene glycol (PEG) to form PEG-S-ACP nanoparticles. The nanoparticles were loaded in the polysorbate 80 micelle through a micelle self-assembly process in an aqueous environment. This MVs–mimicking model is referred to as the PEG-S-ACP/micelle model. By adjusting the pH and surface tension of the PEG-S-ACP/micelle, two forms of minerals (crystalline mineral nodules and ACP nanoparticles) were released to achieve the extrafibrillar and intrafibrillar mineralization, respectively. This in vitro mineralization process reproduced the mineral nodules mediating in vivo extrafibrillar mineralization and provided key insights into a possible mechanism of biomineralization by which in vivo intrafibrillar mineralization could be induced by ACP nanoparticles released from MVs. Also, the PEG-S-ACP/micelle model provides a promising methodology to prepare mineralized collagen scaffolds for repairing bone defects in bone tissue engineering.     

Functional Casein-Poly saccharide Conjugates Prepared by Controlled Dry Heating

Casein was conjugated with dextran and galactomannan in a controlled dry state at a relative humidity of 79% and at 60°C for 24 hr. The covalent attachment of polysaccharides to casein was confirmed by SDS-PAGE and HPLC. The emulsifying activity of the casein-dextran and casein-galactomannan conjugates was 1.5 times higher than that of casein. The emulsion stability of the casein-dextran and casein-galactomannan conjugates was 10 times higher than that of casein. The improvement in these emulsifying properties reached a steady state when the conjugation of casein with polysaccharide was done for 24 hr in a controlled dry state, suggesting the rapid formation of conjugates through a Maillard reaction in the case of casein. Compared to commercial emulsifiers, the casein-polysaccharide conjugates showed better emulsifying properties in acidic and high-salt concentration systems.     

Aroid scarabs in the genus Peltonotus Burmeister (Coleoptera,Scarabaeidae, Dynastinae): key to species and new distributional data

The southeast Asian scarab beetle genus Peltonotus Burmeister (Scarabaeidae, Dynastinae, Cyclocephalini) is reviewed. New country records for Peltonotus morio Burmeister (Myanmar and Vietnam), Peltonotus nasutus Arrow (southern China and Cambodia), and Peltonotus favonius Jameson and Wada (Myanmar) are reported, including a new record in the Palearctic/Sino-Japanese biogeographic region. The first female specimen of Peltonotus favonius is described. Biological associations with aroid inflorescences are reviewed, and human consumption of Peltonotus beetles is reported. A key to all species, paralectotype designations for Peltonotus nasutus, diagnoses, and distributions using dynamic mapping tools are included.     

Operant supplementary heating in groups of growing pigs in relation to air velocity

The aim of the experiments was to investigate the effect of air velocity on the temperature preferred by growing pigs 12–14 weeks old. Pigs displayed a temperature preference by means of operant supplemental heating. They pushed a button connected to heating lamps. Six experiments of three weeks each and with two treatments with a group of 8 pigs each were made. Animals were housed in groups and weighed 14–20 kg at the start of the experiments. Air velocity was 0.08, 0.25 and 0.40 m/s. At each air velocity four replicates were made. Mean temperatures preferred were 17.9°C at 0.08 m/s, 20.5°C at 0.25 m/s and 21.7°C at 0.40 m/s. Within a day temperature preference fluctuated with 5.7 K at 0.08 m/s, 4.3 K at 0.25 m/s and 4.2 K at 0.4 m/s. Temperatures preferred were highest during day time.     

Diurnal water storage in the stems of Picea sitchensis (Bong.) Carr.

Abstract. Two models of the relationship between diurnal variation in shoot water potential and transpiration in 14-year-old Picea sitchensis (Bong.) Carr. were compared. The first model was a physiologically based resistance-capacitance (R-C) analogue with its associated differential equations. The second was a non-physiological discrete-difference (D-D) or stochastic transfer function model. The RC model included only the effect of water storage in the phloem and bark while the D-D model implicity included all storage mechanisms. The R-C and D-D models explained similar fractions (62% and 68% respectively) of the variation in shoot water potential due to diurnal changes in transpiration rate. However, the D-D model had fewer parameters than the R-C model. The results from the D-D model showed that the resistance to flow from soil to shoots along the trunk, (RT), was 5 × 10³ MPa kg^-1s and the capacitance of the phloem and bark treated as a single store, (C_s), was 1.6 kg MPa^-1. It is suggested that the resistance to flow into storage (R_s) is much greater than R_T and can be disregarded. A non-linear version of the D-D model suggested [hat resistance to flow in the trunk increases with increasing transpiration rate.     

Evaluation of microwave hyperthermia applicators.

Hyperthermia has been used in conjunction with radiation and chemotherapy for cancer treatment. When using electromagnetic heating, applicators are critical components in contact with or in proximity to patients and can be the determining factor for effective and safe treatment. Tissue absorption of electromagnetic energy is determined by many factors. Three cases are shown to illustrate the complexity of microwave heating: 1) The BSD MA-151 applicator has good center heating on a muscle-only phantom as shown in the operation manual. When fat slabs of 0.25, 0.5, 1, and 2 cm thick were added, two hot spots near the periphery of the applicator were evident on all fat surfaces, exposed at 631 MHz. At 915 MHz, the heating was elongated on the surface of the models with 0.25- and 2-cm fat, and two hot spots were observed on the 0.5- and 1-cm fat surfaces. 2) Heating patterns of the Clini-Therm applicators on a muscle-only phantom, as indicated in the operations guide, are elliptical with their major axes perpendicular to the electric field. However, when a bolus is used, the elliptical pattern is parallel to the E field. 3) Heating patterns in cylindrical structures were studied with inhomogeneous models of limbs. Arm and thigh models consisting of fat, bone, and muscle material were heated with Clini-Therm L, M, and MS applicators at 915 MHz. In addition to the geometric effect, the results indicated that placing the applicators with E field parallel to the long axis of cylindrical structures can minimize required power, produce less heating of fats and reduce stray radiation. In conclusion, to apply penetrating microwave or other RF fields for tissue heating, one must simulate the clinical exposure conditions as closely as possible to obtain useful heating patterns.     

Multiple protein sequence alignment from tertiary structure comparison: assignment of global and residue confidence levels.

An algorithm is presented for the accurate and rapid generation of multiple protein sequence alignments from tertiary structure comparisons. A preliminary multiple sequence alignment is performed using sequence information, which then determines an initial superposition of the structures. A structure comparison algorithm is applied to all pairs of proteins in the superimposed set and a similarity tree calculated. Multiple sequence alignments are then generated by following the tree from the branches to the root. At each branchpoint of the tree, a structure-based sequence alignment and coordinate transformations are output, with the multiple alignment of all structures output at the root. The algorithm encoded in STAMP (STructural Alignment of Multiple Proteins) is shown to give alignments in good agreement with published structural accounts within the dehydrogenase fold domains, globins, and serine proteinases. In order to reduce the need for visual verification, two similarity indices are introduced to determine the quality of each generated structural alignment. Sc quantifies the global structural similarity between pairs or groups of proteins, whereas Pij' provides a normalized measure of the confidence in the alignment of each residue. STAMP alignments have the quality of each alignment characterized by Sc and Pij' values and thus provide a reproducible resource for studies of residue conservation within structural motifs.     

光钳操纵生物活体的动态监测技术的研究

采用摄像、录像和视屏监控系统及显色偏振装置与光钳系统耦合,从空间分辨、色分辨和时间分辨多方面改善系统品质,实现了光钳捕获与操纵生物活体的动态监测、实时记录、资料保存和屏幕再现的功能,并能测量光钳操纵细胞的位移量和由此计算操纵速度,提高了光钳的自我调整和光钳操纵细胞的精细度。本研究为激光光钳技术在细胞工程等方面的应用研究提供了行之有效的技术手段。